tag:blogger.com,1999:blog-8371051.post2475462319592761568..comments2023-06-11T02:21:31.803-07:00Comments on Moosteria: Rob Dobson's Scara RobotMoosteronhttp://www.blogger.com/profile/11876161230067008258noreply@blogger.comBlogger3125tag:blogger.com,1999:blog-8371051.post-91121284949898723082021-04-16T12:28:18.136-07:002021-04-16T12:28:18.136-07:00Thanks, Moos. I can see those on Thingiverse and I...Thanks, Moos. I can see those on Thingiverse and I'll combine them with the original set and figure out which to use.<br /><br />That board on Tindie is nice, but I'm planning to spin my own board and firmware for this.B. Perryhttps://www.blogger.com/profile/02727374533265019435noreply@blogger.comtag:blogger.com,1999:blog-8371051.post-90155935594109985172021-04-15T16:25:00.004-07:002021-04-15T16:25:00.004-07:00I've put the parts on Thingiverse at https://w...I've put the parts on Thingiverse at https://www.thingiverse.com/thing:4829446 (if Thingiverse is working today). I don't know for certain that these are the right versions, as it is a while since I worked on this. BTW, if you are looking at control boards, you might also consider Bart Dring's on here: https://www.tindie.com/products/33366583/grbl_esp32-cnc-development-board-v41/. I've used this on another project and it's a good design with some very solid firmware (grbl_esp32).Moosteronhttps://www.blogger.com/profile/11876161230067008258noreply@blogger.comtag:blogger.com,1999:blog-8371051.post-78966020925590881412021-04-15T10:09:14.777-07:002021-04-15T10:09:14.777-07:00Moos, I'm looking to build one of these myself...Moos, I'm looking to build one of these myself, but with my own firmware. Have you posted your improvements to the physical design anywhere? Is that something you'd be willing to share maybe on Github?B. Perryhttps://www.blogger.com/profile/02727374533265019435noreply@blogger.com