Moosteria

If you use a piece of glass on the heated bed of your 3D printer, how does the temperature measured by the thermistor compare to the tempera...

There has been some discussion on the Folger thread at http://forums.reprap.org about setting the extrusion multiplier. I've noticed in...

I previously wrote about printing static and dynamic mechanical components. Here I take it a step further, with a simple spring driven motor...

A few weeks ago, I wrote about printing mechanical parts, focussing on the static aspects such as making screw holes large enough. The concl...

NinjaFlex is a very flexible, rubbery filament. I have tried to print with it in the past and either failed completely or got very poor prin...

A while back I wrote about some different filaments I had been trying out. Since then I've continued to test them and others, and I have...

Many of the mechanical and constructional parts that I have printed have not come out right. In particular, holes for screws and the like ha...