It's been a while since I wrote about my functional reconstruction of the Antikythera mechanism. I had a long pause in working on it, and then started a redesign and update a couple of months ago. It is very nearly complete. The main revisions, in outline are:
- reorganize the planet mechanism, especially for the superior planets, to save a little vertical space.
- eliminate gears where the axle is held at only one end and a shaft collar is used to hold the other end. This applies mostly to planet gears, though some of the back gears (for example, k1/k2) are also affected. Where possible, the axles are now held at both ends. One important change that goes with this is changing the shape of the strap so it has support points for the axles.
- make some gears thicker, for smoother running.
- add grub screws to fix some gears and other parts to their axles.
- add a rim to support the mercury follower.
- strengthen some parts of the frame, especially the support for the a1 contrate gear.
- complete the design for the metonic and saros pointers. They use a bevel gear driving a cylinder with a spiral groove on it. As with Chronova Engineering design, you sight down to see where edge of the cylinder with the spiral is relative to the metonic and saros scales. I'll try to add a picture later to show this, as it's a bit hard to describe.
- add front and back plates. They are laser-cut acrylic.
- add a stand.
- many small changes to exact dimensions and tolerances.
The mechanism now seems much smoother than before. Pictures and video to follow in another post.
No comments:
Post a Comment